Shopstuff CS209, Руководство пользователя

Страница: 12 / 15

12
When counting if the letter “E” appears on the left hand side of the LCD
display and a loud buzzing sound occurs, there is machine error
— this is
usually caused by damaged or foreign coins or objects other than coins
jamming the machine that may have entered the machine mixed with the
coins.
1. Firstly try pressing the “START” button twice so as the machine can
reverse and try to dislodge any jammed coins.
2. If this does not work for you, Un-plug the machine from the wall, and make
sure that ALL coins have been removed from the top hopper.
3. Open the machine by pressing the small grey square button on the front of
the machine and check for any jammed coins or possible foreign objects such
as a paperclip or even excessive dirt on the round black disc.
4. Close the machine and power back up. The machine will reset itself and
clear the jam. If this procedure does not clear the jam then you may have to
remove the internal centre disk, instructions on how to do this can be found in
the maintenance & cleaning instructions.
It is strongly recommended that the count is re-started as coins may have
been forced into the wrong collection pots when the machine has tried to clear
itself.
Somet
imes coins will form a “BRIDGE” across the hopper causing the coins to
stop feeding. If this happens simply move some coins in the hopper this will
cause the coins to resettle and counted will automatically start feeding again.
Please note that failure to operate the machine in the way advised within
these instructions may invalidate your warranty and costs may be issued for
repairs carried out on a returned machine due to operator use and not
following the instructions carefully. Do not over fill coin trays otherwise this
may damage the machine.