SHOPSMITH STORAGE CABINET SYSTEM
Page 3
Casters
1.
Lay the cabinet down on its top. Use packaging material to
protect the paint finish.
2.
Mount both swivel casters on the back side of the cabinet and
the locking caster to the front (drawer side).
3.
Attach each caster using four bolts per cabinet for the casters
and two for each handle.
4.
Wrench tighten all bolts.
5.
Return cabinet to its upright position.
6.
See Figure A-1, for final assembled
cabinet.
Multi-side by side assembly
1. Attach casters as noted above.
2. Attach 1 handle to each end of cabinet.
3. Use hinge pins to attach cabinets to each other.
4. See Figure A-2 for final assembled cabinet.
5. The Cabinet assembled in this manner will slide under the
Mark V unit, see figure A-3.
Figure A-1
Figure A-2
Figure A-3
