Shoprider Scooters User Guide
3
4. ADJUSTMENTS
Tiller Angle Adjustment (Fig 2)
At the base of the tiller is a round knob.
Turn the knob counterclockwise to loosen the tiller and select the desired tiller angle.
Turn the knob clockwise to securely lock the tiller into place.
Folding the Tiller (Fig 2)
Fold down the tiller by loosening the tiller angle adjustment knob located at the base of the
tiller. Tighten knob to lock tiller in place.
You may lock the tiller assembly into place so that it doesn’t swing from side to side by lifting
the yellow tiller lock lever up and to the right. (Do not forget to unlock the tiller lever lock
when driving scooter.
NOTE: For Safety, this lock is designed to break away if the scooter is driven when locked.
Seat Removal (Fig 3)
Fold down the back of the seat. Lift the swivel seat release handle up to lift the seat up and
off the seat post.
Seat Height Adjustment (Fig 4)
Remove seat as described (fig 3). Remove battery pack (refer to disassembly section). Using
two 13mm wrenches, remove locking bolt and nut.
Adjust seat post up or down to desired position.
The seat height can be adjusted to five different positions by inserting the locking bolt in the
desired hole. Replace washer and nut and tighten.
Replace battery pack and seat.
Serial Number (Fig 5)
Serial number is located on the seat post. It is on a white sticker with a barcode. The serial
number is 13 alpha numerical digits beginning with the number 1.
Fig. 2
Tiller angle
adjustment
Fig. 5
Fig. 4
Tiller lock
lever
Fig. 3
Fold down
seat back
Locking
bolt
Seat post
Serial no.
Swivel seat
release handle
