Shoprider Start 3 GK-3, Руководство пользователя

Страница: 8 / 20

12/8/2006SE 8
Seat Height Adjustment (Fig 5)
Remove seat as described (fig 4). Remove
battery pack (refer to disassembly section).
Using two 13mm wrenches, remove locking bolt
and nut. Adjust seat post up or down to desired
position. The seat height can be adjusted to five
different positions by inserting the locking bolt in
the desired hole. Replace washer and nut and
tighten. Replace battery pack and seat.
Serial Number (Fig 5)
Serial number is located on the seat post. It is on
a white sticker with a barcode. The serial number
is 13 alphanumerical digits beginning with the
number 1.
Armrest Width Adjustments (Fig 6)
On the underside back of the seat there are
two arm rest hand knobs, one on each side.
Turn hand knobs counterclockwise to loosen.
Loosening the arm rest hand knob allows the
armrest width to be adjusted or arm rest to be
removed. Once the desired positions of the
arm rests are set, tighten the hand knobs by
turning clockwise to lock the arm rests into
place.
Armrest Adjustments (Fig 6)
The arm rests may be pulled up and out of
the way for sideways transfer. Pull arm rest
up and back.
The arm rest angle may be adjusted by
turning the adjustment screw either clockwise
or counterclockwise depending on the
desired angle.
Arm Rest
Hand Knob
Pull Arm Up
Figure 6
Figure 5
Scooter
Serial
Number
Locking
Bolt
Seat
Post
Adjustment
Holes