Shoprider Sena 888WNLS, Руководство пользователя

Страница: 9 / 20

Continued…..
VSI ‘Lock’ Function
Your VSI controller is equipped with a lock function to prevent any
unauthorised use. To lock the controller:

When the power is on, press and hold the power button for about 1
second until the system bleeps.

Move the joystick forward until it bleeps, then move it to the back
position until you hear a bleep.

Release the joystick – you should now hear a long bleep, this indicates
the system is now locked.
To unlock the controller:

Press the power button until the speed indicator lights go from left to
right.

Move the joystick forward until it bleeps, then move it to the back
position until you hear a bleep.

Release the joystick – you should hear another bleep, this indicates
that the system is unlocked and ready for use.
Should the rubber boot/gaitor on the joystick become damaged, replace
immediately.
Brake Release / Freewheel Operation
In the event of power failure or the need to move
the powerchair without driving, the
electromagnetic brakes can be disengaged by
operating the two yellow levers. One is located
at the rear right of the powerchair (opposite), and
the other as indicated on page 3.
Rear Release
Lever
Pull the levers up toward you, this will then
release the brakes allowing the powerchair to be
pushed. Simply push the levers in to re-engage
the brakes.
Caution! Do not attempt to use your powerchair when not in gear.
Freewheel mode should only be used in an emergency to manoeuvre the
powerchair due to power failure or to move it WITHOUT AN OCCUPANT.
Please ensure the brakes are re-applied as soon as possible after dis-
engagement.
8