Shoprider K0835, Руководство пользователя

Страница: 13 / 32

13
To unlock the Powerchair controller
1. Use the on/off button to switch the controller on.
2. The maximum speed/profile indicator will be rippling up and down.
3. Push the joystick forward until the controller bleeps.
4. Push the joystick in reverse until the controller bleeps.
5. Release the joystick, there will be a long bleep.
6. The Powerchair is now unlocked.
Sleep Mode
If the controller is left on and not used for more than ten minutes, the
controller will automatically “go to sleep”. This is recognized by a slow
intermittent flash of the battery indicator lights. Simply turn the controller
off and back on to reset.
Drive/Freewheel Mode
The drive/freewheel levers are found at the rear of the Powerchair
(Figure 10). These levers will allow you to disengage the
electromagnetic brakes, and allow the unit to be maneuvered by
pushing the chair.
Make sure the VR2 is powered off. To place your power wheelchair
into freewheel mode, pull both drive/freewheel Drive levers outward.
This will disengage the electromagnetic brakes. To return the power
wheelchair to drive mode, push both levers inward. Press the on/off
button to power on the VR2. If the battery gauge is not flashing, proceed to drive your chair as
normal. If the power chair does not move when the joystick is moved in any direction, then double
check that the drive/freewheel levers have been engaged fully in the inward position.
Main Circuit Breaker
The main circuit breaker is a safety device that will trip to protect the motor and electronics when
they are subjected to excessive loads. It is located at the top-rear (left side) of the unit and can be
reset, should a trip occur.
If a circuit breaker trip occurs, allow the power wheelchair to rest for approximately 1 minute before
depressing the circuit breaker button. Should frequent circuit breaker trips occur, please contact
your Shoprider
®
provider.
Preparing To Use Your Power Wheelchair
CAUTION
The XLR 14 is designed to assist with your individual mobility needs. Any usage
outside of the guidelines in this manual may result in damage to the chair or injury to
the user or third party.
Figure 10