Shoprider K0835, Руководство пользователя

Страница: 11 / 32

11
pushed from the neutral position, the faster the wheelchair moves. Maximum speed is limited by
the speed adjustment buttons (increase and decrease). To slow the wheelchair to a STOP, simply
release the joystick.
CAUTION
When learning to drive, select a slow speed and try to drive the wheelchair as slowly
as possible by pushing the joystick forward slightly.
Wheelchair Controller Functions
The following is a quick review of the major functions
Turn the controller power button on.
Forward – push the joystick forward.
Reverse – pull the joystick back.
Turn right – push the joystick to the right.
Turn left – push the joystick to the left.
Stop – release the joystick.
VR2 Joystick Controller
On-Off Button: Use this button
to turn the joystick controller
(hereinafter referred to as VR2) on
and off. Do not use this button to
stop the power wheelchair, except
in an emergency.
(Item A-Figure 09)
Battery Gauge: This is a
10-segment display, located on the
face of the VR2. It indicates if the
VR2 is switched on and provides
the state of charge of the battery.
It also indicates any faults in the
power wheelchair electrical system.
Refer to Table 1 for more details.
(Item B-Figure 09)
Horn Button: Press this button to sound the warning horn (Item C-Figure 09).
Maximum Speed Indicator: This is a 5-segment display that indicates the maximum
speed setting selected (Item D-Figure 09).
Speed Decrease Button: Press this button to decrease the maximum speed (Item
Figure 09
A
C
E
D
F
H
B
G