Hand tool required -
Hex Key Wrench (4mm)
Steps for Adjustment - The spring force
can be adjusted by a hand tool to twist
position-adjustable hole clockwise (from
"Position-adjustable Hole"
position 5 to 1) or counterclockwise (from
position 1 to 5) to set at the desired one of 5
stages to be softer or harder.
Harder
Softer
Remark: Please do not twist counterclockwise
from the position No.5 next to No.1 as shown,
otherwise, it's no way to reverse from position
No.1 back to No.5 unless to take apart the whole
suspension assembly from the rear chassis to
reset the standard position of the adjustable-
Note
1
5
suspension assembly.
OK
NG
