Inspection & Maintenance
To keep your Shoprider scooter in good working order, some home maintenance can be
done along with regular servicing by your Shoprider dealer.
CAUTION: Only qualified technical people should carry out service work.
SEAT UPHOLSTERY: A damp cloth and a mild soap will keep your seat and backrest
looking good. Do not use abrasive cleaners, as this will damage the coating. Chemical
cleaners can damage upholstery.
Ultra-violet light can also reduce the life of the upholstery coating material. This is a
normal ageing process, and cannot be guaranteed (see exclusion in the Warranty terms
section).
BODYWORK: The bodywork on your scooter can be lightly washed with mild soap and
water. Auto polish can be used to keep the paint in pristine condition. Do not use abrasive
cleaners or strong detergents, as this will fade the color.
CAUTION: Do not pressure wash your scooter. Water could be forced into the electronics
and cause permanent damage.
DO NOT park your scooter in damp conditions. This may affect the electronics if left for
very long periods of time.
ELECTRONICS: Servicing of the drive electronics and charger should only be carried out
by your local Shoprider service dealer. These units are sealed and should not be opened.
BROKEN SEALS WILL VOID YOUR WARRANTY.
You will find that the distance that your scooter can travel will gradually increase over the
first few weeks of use, as the batteries reach their optimum efficiency after approximately
12 cycles of discharge and recharge.
WARNING
1.
Do not smoke or use an open flame while your batteries are being charged.
2.
Do not use an extension cord unless absolutely necessary. Use of an improper
extension cord could result in a risk of fire and electric shock.
3.
Do not use the charger if it has received a sharp blow, been dropped or otherwise
misused in any way. Take it to a qualified technician.
