Shoprider 888WNLL, Руководство пользователя

Страница: 7 / 20

Release Levers
Continued…..
Seat Height
(We recommend that this operation be carried out by two persons)
The seat can be set at three different heights.
Firstly, ensure that the power is switched off and
carefully unplug the joysti ck at the rear of the
powerchair. Stand at the front of the powerchair
and hold the seat while the second person
releases the two yellow levers on the underside
rear of the seat. Pivot the rear of the seat up to the
front of the chair. Hold the chair in this position
taking care not to let the seat rest on the joystick.
Remove the locking pins to raise or lower the two
rear seat support brackets to the required height and refit
the pins. Replace the seat. To adjust the front seat height
remove the locking pin from the left hand support bracket. Support the seat
and gently pull out the right side spring locking pin and adjust to the required
height. Ensure the locking pins ar e fully re-engaged before operating the
powerchair.
Backrest angle
Pull up on the backrest reclining lever (left hand side of
the seat) and set the angle required by holding the
backrest in the desired pos ition and then release the
lever, the backrest will stay in the position selected.
The backrest can be lowered forward onto the seat for
storage or transport. The ba ckrest is spring-loaded and
should be restrained from going forward when the lever
is released.
Note: The powerchair will become more unstable the further the
backrest is reclined. Do not attempt to climb kerbs or slopes with the
backrest in any reclined position. Do not carry bags on the back of the
seat as they may affect stability.
Rear View
6