Desktop Quick Start Guide • October 6, 2017
© Copyright 2017 ShopBot Tools, Inc.
page 13
The Keypad
This window allows the user to manually move the X-, Y,- and Z-axes of
the machine. Click on the blue arrows to move the spindle/router and
gantry.
X- and Y-axes can also be moved with the cursor buttons on the comput-
er keyboard. Use the “Page Up” and “Page Down” buttons on the key-
board to move the Z-axis up and down.
Move the spindle/router to a safe Z position below the Z proximity switch
and near the middle of the deck.
Click on the X in the upper right corner to close yellow KeyPad.
Switch Off Router or Spindle First
If a router is being used, ensure the switch is turned
off.
Then, for BOTH ROUTERS and SPINDLES, make sure
the key switch on the pendant is turned to OFF (count-
er-clockwise). This will cut the power to the spindle or
router.
For routers, the collet nut and collet come locked together as a single unit.
For spindles, the collet and spindle nut come separately.
Switch turned off
