Desktop Quick-Start Guide • September 13, 2016
© Copyright 2016 ShopBot Tools, Inc.
page 23
Click the white button marked “Z”.
The message at right will appear. Double check the
location of the Z zero plate and click OK. An alarm will
sound signifying that the Z-axis will start moving down
in couple of seconds. Hold the angled end of the Z zero
plate in place while the Z zero routine takes place.
The spindle/router bit will lower to contact the Z zero plate, then
immediately repeat the process.
Note:
Wait until the router bit has contacted the Z zero plate
twice before removing the Z zero plate or the grounding clip.
The router bit will retract to a position of 1/2” above the deck.
The Z-axis is now zeroed to the top of the MDF deck.
Put away the clip and Z zero plate.
Press “OK” to exit the program.
Содержание D2418
Страница 2: ...Desktop Quick Start Guide September 13 2016 Copyright 2016 ShopBot Tools Inc page 2...
Страница 4: ...Desktop Quick Start Guide September 13 2016 Copyright 2016 ShopBot Tools Inc page 4...
Страница 6: ...Desktop Quick Start Guide September 13 2016 Copyright 2016 ShopBot Tools Inc page 6...