1
6
7 8
9
10
11
5
4
2
3
7
8
FEATURES AND SPECIFICATIONS (continued)
SETUP
Mild steel:
1/4"
Sever:
1/2"
Power Supply / Phases (V-Ph)
115/230V - 1 +/- 15%
Rated input Power (KVA)
5.5-230V
Rated Output Current
20-30A
Duty Cycle @ 104ºF
35% @30A - 230V
Efficiency
85%
Open Circuit Voltage
96V
Protection Class
IP21S
Cutting Capacity*
Rated:
1/4" (6.4 mm)
Sever:
1/2" (12.7 mm)
Air Supply:
Clean, dry, oil-free
compressed air
Recommended Input
6.0 SCFM @ 75 PSI
Pressure/Flow
Size (Inches)
20" x 12" x 16"
Weight (Pounds)
20.25
Compliant to
CAN/CSA E60974-1
*mild steel
TECHNICAL DATA
FEATURES
CUTTING CAPACITY
• POWERFUL AND RELIABLE IGBT INVERTER
TECHNOLOGY DELIVERS 30 AMPS AT A 35%
DUTY CYCLE
• DUAL VOLTAGE-SENSING TECHNOLOGY
(115V
OR 230V)
LETS YOU PLUG INTO ANY COMMON
POWER SUPPLY WITH INCLUDED ADAPTER
• CUTS MILD STEEL, STAINLESS, BRASS,
ALUMINUM AND OTHER CONDUCTIVE
MATERIALS
• LOW FREQUENCY, PILOT ARC SYSTEM FOR
INSTANT STARTS AND EASE OF USE WHEN
CUTTING RUSTY MATERIAL AND WILL
NOT INTERFERE WITH OTHER ELECTRICAL
SYSTEMS INCLUDING TELEPHONE OR
COMPUTER
• SELF-RESETTING THERMAL OVERLOAD
PROTECTION WITH INDICATOR LIGHT
AUTOMATICALLY SHUTS OFF TO AVOID
OVERHEATING
• ADJUSTABLE AIR FILTER/ PRESSURE
REGULATOR
• LIGHTWEIGHT AND PORTABLE LESS THAN
21 POUNDS!
• FAN COOLED
BUILT TO GET THE JOB DONE
1. 12 ft. TRF45 Plasma Torch
(Direct Connect)
2. 115/230V Power Adapter
3. Work Clamp
4. Work Clamp Connection
5. Air Pressure Gauge
6. Current Adjustment
7. Power Light
8. Overload Light
9. Cutting Operation Light
10. Trigger Latch Operation
11. Cutting Mode Switch
12. Air Regulator
13. Control PCB
14. Magnetic Valve
15. Power Switch
16. Input Power Cable
12
14
13
15
16
FEATURES AND SPECIFICATIONS
BUILT TO GET THE JOB DONE
(1) Connect the earth lead to the output terminal of the machine and tighten.
(2) Connect the air supply to the air connection located at the rear of the machine.
Turn on the air supply
(3)
located at the rear of the machine.
(4) Select 2T / 4T operation
Operating procedure using the 2T / 4T Function with Plasma torch.
Set torch operation 2T / 4T.
•
When 2T operation is selected press trigger Arc starts, release trigger Arc stops.
•
When 4T operation is selected press and release trigger Arc starts,
press and release trigger Arc stops.
(5) Set amperage dial.
(3) Connect the machine to the
correct power supply and switch on
located at the rear of the machine..
(2) Connect the air supply to the air
connection located at the rear of the
machine. Turn on the air supply.
(4) select 2T or 4T torch control .
(1) Connect the earth lead to the
output terminal of the machine and
tighten.
(5) Set the amperage dial
