SHOP INDOOR GOLF DIY Golf Simulator Enclosure, Инструкция по сборке и руководство пользователя

Страница: 8 / 15

Frame Assembly
Note:
Insert Pipes fully into canopy fitting connectors and then tighten the hex bolts with a
wrench or socket wrench. This step will be repeated throughout the Frame Assembly
Portion of this manual.
Step 1
Attach (2) 71 ” pipe in the center with a straight connector and attach (2) 3-way connectors
on each end.
Step 2
Now insert (2) 56 3/8” pipe into the left and right side of the frame at the bottom.
Step 3
Connect FL elbow to the left and right of the frame as shown in the image below:
56 3/8” Pipe
L Connector
56 3/8” Pipe
71 ” Pipes
3 Way
3 Way
5
Straight Connector
L Connector