Enclosure Assembly
Step 3
Use bungees to attach the Nylon Surround to
the back and top side of the frame.
Insert the loop side of the bungee into the
grommet, sending it through until the ball
side stops it, wrap the loop around the pipe
and attach it to the ball side of the bungee.
Step 4
Use bungees to attach the Impact Screen to
the frame.
Using the same method as before, attach
the Impact Screen to the top, bottom, left,
and right sides of the frame.
Helpful Tip:
Bungee the top left and right
corners of the screen first so it is suspended,
making it easier to attach all other bungees.
Note:
Make sure the ball of the bungee is rotated away from the golfer.
9
Содержание DIY Golf Simulator Enclosure
Страница 1: ...4...
Страница 7: ...Enclosure Diagram Page 4...