Shop fox W1876, Руководство пользователя

Страница: 32 / 52

Figure.25. Fence slide bracket lubrication
locations.
-30-
Model W1876 (For Machines Mfd. Since 7/20)
M
A
INTE
N
A
N
CE
Lubrication
Since all bearings are sealed and permanently lubricated,
simply leave them alone until they need to be replaced.
DO NOT lubricate them.
It is essential to clean components before lubricating
them because dust and chips build up on lubricated
components and make them hard to move. Simply adding
more grease to them will not yield smooth-moving
components.
Item(s).Needed. Qty
Pump-Type Oil Can .............................................1
Mineral Spirits ....................................... As Needed
Clean Shop Rags ..................................... As Needed
Fence.Slide.Bracket
Oil Type .......................................ISO 68 Equivalent
Oil Amount ............................................ 1–2 Drops
Lubrication Frequency ...............Monthly, or As Needed
Clean fence slide bracket pivot points and guide ways
(see
Figure.25
) with mineral spirits and shop rags, allow
to dry, then lubricate with light machine oil.
Move components along their full range of motion several
times, then wipe off any excess oil.