Shop fox W1871, Руководство пользователя

Страница: 17 / 32

-15-
Model W1871 (For Machines Mfd. Since 05/19)
SE
TU
P
Test.Run
Serious. injury. or. death. can. result.
from. using. this. machine. BEFORE.
understanding. its. controls. and. related.
safety.information..DO.NOT.operate,.or.
allow.others.to.operate,.machine.until.
the.information.is.understood..
DO. NOT. start. machine. until. all.
preceding.setup.instructions.have.been.
performed..Operating.an.improperly.set.
up. machine. may. result. in. malfunction.
or. unexpected. results. that. can. lead.
to. serious. injury,. death,. or. machine/
property.damage.
Once assembly is complete, test run the machine to
ensure it is properly connected to power and safety
components are functioning properly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from power,
and fix the problem BEFORE operating the machine again.
The
Troubleshooting
table in the
SERVICE
section of this
manual can help.
To.test.run.machine,.do.these.steps:
1.
Clear all setup tools away from machine.
2.
Connect machine to power supply.
3.
Turn machine ON , verify motor operation, and then
turn machine OFF .
The motor should run smoothly and without
problems or unusual noises.
The Test Run consists of verifying the following:
1) The motor powers up and runs correctly.