Model W1793/W1794 Professional Spray Gun
-6-
Assembly
2.
Screw the cup onto the top of the
body.
3.
Attach the air hose to the spray gun
with a 1⁄4" NPT quick connect set-up
(not included)
.
Note:
You have the option of attach-
ing the regulator/guage directly to
the gun as shown in the photos. Some
may find this awkward and would
rather mount the regulator/gauge
closer to the air source.
4.
Attach the spray gun to an air hose
regulated between 29 and 50 PSI.
Note:
For the best results, use a hose
that will be dedicated for spray use
only. Do not use a hose that has been
used with an in-line oiler or other
possible contaminant.
1.
Insert the filter into the gun body
(see
Figure 6
).
1.
Fluid Control:
Controls the volume
of material that travels through the
fluid tip.
2. Pattern Control:
Adjusts the spray
pattern from a round pattern to a
wide fan.
3. Air Flow Control:
Controls the fluid
pressure inside the spray gun.
4. Atomizing Cap:
Controls the spray
pattern from vertical to horizontal.
5. Trigger:
Two stage trigger. Stage
one only releases compressed air for
blowing off the work piece. Stage two
sprays material.
6. Cup:
600 ml plastic cup allows easy
viewing of material level. Includes a
vented cap.
7. Regulator/Gauge:
Regulates inlet
air pressure to the spray gun. On
either spray gun, the regulator can be
attached directly to the gun for on-
the-spot air adjustments or directly
from the air source. On either spray
gun, DO NOT attach to an unregulat-
ed air source that exceeds 120 PSI.
Note:
The W1793 spray gun regulator
must be purchased separately.
Controls
Figure 6.
Installing filter.
Figure 7.
Controls.
Cup
Fluid Control
Pattern Control
Atomizing Cap
Trigger
W1794 Regulator
Air Flow Control
Содержание SHOP FOX W1793
Страница 2: ......
