Shop fox Shop fox M1008, Инструкция по эксплуатации

Страница: 18 / 64

-16-
SET
UP
M1008/M1009 Mill
The way cover protects the back part of the cross ways.
To install the way cover, do these steps:
1.
Remove the four screws from the machine at the
way cover mounting location (
Figure 11
).
Note:
The two screws located near the column use a
nut and washer.
2.
Place the way cover on the machine and align it
with the fastener holes.
3.
Attach the way cover with the four screws removed
in
Step 1
.
Way Cover
Figure
11
. Way cover mounted correctly
on the machine.
Figure 12.
Locations to install handles.
Screws
(two each side)
Handles are provided to ease handwheel operation.
To install handles onto the handwheels, do these
steps:
1.
Thread handles into the face of the handwheels (see
Figure 12
for locations).
2.
Tighten the handles with a flat head screwdriver
Handles
Handle Installation
Locations