background image

-5-

D3589 Mini Grinder Set

SA

FE

T

Y

10.  NEVER LEAVE WHEN MACHINE IS RUNNING. 

Turn power 

OFF

 and allow all moving parts to come 

to a complete stop before leaving machine unattended.

11.  DO NOT USE IN DANGEROUS ENVIRONMENTS. 

DO NOT use machinery in damp, wet locations, 

or where any flammable or noxious fumes may exist. 

12.  KEEP WORK AREA CLEAN AND WELL LIT. 

Clutter and dark shadows may cause accidents.

13.  USE  A  GROUNDED  EXTENSION  CORD  RATED  FOR  THE  MACHINE  AMPERAGE. 

Undersized 

cords  overheat  and  lose  power.    Replace  extension  cords  if  they  become  damaged.  DO  NOT  use 

extension cords with 220V machinery. 

14.  ALWAYS  DISCONNECT  FROM  POWER  SOURCE  BEFORE  SERVICING  MACHINERY

.  Make  sure 

switch is in OFF position before reconnecting.

15.  MAINTAIN MACHINERY WITH CARE.

 Keep blades sharp and clean for best and safest performance. 

Follow instructions for lubricating and changing accessories.

16.  MAKE  SURE  GUARDS  ARE  IN  PLACE  AND  WORK  CORRECTLY  BEFORE  USING 

MACHINERY.

17.  REMOVE ADJUSTING KEYS AND WRENCHES.

 Make a habit of checking for keys and adjusting 

wrenches before turning machinery 

ON

.

18.  CHECK FOR DAMAGED PARTS BEFORE USING MACHINERY.

 Check for binding and alignment 

of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect machine 

operation. Repair or replace damaged parts.

19.  USE RECOMMENDED ACCESSORIES.

 Refer to the instruction manual for recommended accesso-

ries. The use of improper accessories may cause risk of injury.

20.  DO  NOT  FORCE  MACHINERY.

  Work  at  the  speed  for  which  the  machine  or  accessory  was 

designed.

21.  SECURE  WORKPIECE.

  Use  clamps  or  a  vise  to  hold  the  workpiece  when  practical.  A  secured 

workpiece protects your hands and frees both hands to operate the machine.

22.  DO NOT OVERREACH.

 Keep proper footing and balance at all times.

23.  MANY MACHINES WILL EJECT THE WORKPIECE TOWARD THE OPERATOR. 

Know and avoid 

conditions that cause the workpiece to "kickback."

24.  ALWAYS LOCK MOBILE BASES  (IF USED) BEFORE OPERATING MACHINERY

.

25.  BE AWARE THAT CERTAIN DUST MAY BE HAZARDOUS

 to the respiratory systems of people and 

animals, especially fine dust. Make sure you know the hazards associated with the type of dust you 
will be exposed to and always wear a respirator approved for that type of dust.  

Содержание SHOP FOX D3589













Отзывы: