Shofu EyeSpecial C-3, Руководство для продвинутых пользователей

Страница: 96 / 100

90
Message Cause Measure Reference
Memory card full The storage is full.
Change the image size and image
quality.
P.12
Erase some images. P.54
Replace the full memory card with
another memory card with sufficient
capacity remaining.
P.11
All file numbers used
Too many files are stored in the SD
card.
*This camera can manage approxi-
mately 65,000 images per memory
card. Erase some images. P.54
Replace the full memory card with
another memory card with sufficient
capacity remaining.
P.11
Memory card locked SD memory card is protected. Slide up the write-protected tab. P.12
No image No image is recorded in the SD card.
Replace the empty card with the
recorded one, or take new photos
to record.
P.11
Cannot read file The image file is damaged.
Cannot read the damaged JPEG
files.
P.86
Incompatible memory card
Incorrect/unsupported SD card is
being used.
Compatible memory cards are SD
Card or SDHC Card. SDXC cards
are not currently supported.
P.11
Following factors are considered.
· File system was changed by formatting the SD card using a computer.
· Formatted in different camera or other devices.
Format the SD card following the instructions displayed on the LCD screen
of the camera. All recorded images are erased after formatting the SD
card. Backup the necessary files by transferring pictures to the computer.
It might be also considered that SD card is defective. Please try another
card if you have one.
P.86
File system error
SD card system error has been
found.
Format the SD card following the
instructions displayed on the LCD
screen of the camera. It might be
also considered that SD card is
defective. Please try another card if
you have one.
P.85
WB unadjusted
Something other than the provided
SHOFU Gray card was photographed
when white balance is manually set.
Use provided SHOFU Gray card. P.83
Frequently asked questions
Question Answer
How long is the battery life? Refer to “Tips: Storage capacities (number of pictures (p.12))”
Why don’t the number of pictures
remaining decrease after taking
pictures? Or why does it some-
times decrease two at once?
The picture does not take up enough space to decrease the number or the picture
takes up space to decrease 2 or more at once. The camera is operating normally
and you can continue taking pictures.
Cannot see a picture taken on
the camera screen. Why?
Possible causes are as follows;
· If the file name is changed or its location is changed to another folder, the image
cannot be displayed on the camera screen. Get it back to the original name and
position.
· If the image is edited or rotated on the computer and then overwritten, the new
image might not be able to be displayed on the camera screen. In this case, it can
not be restored to display on the camera.
What’s the temperature range
for camera use?
It’s between 0°C to 40°C (Humidity : 10 to 80%)