Shockwave S6, Руководство пользователя

Страница: 7 / 11

13
12
While your SHOCKWAVE S6 Marine Suspension Module is designed to
last, you may want to refresh some of the higher wear components to
keep it in peak operating condition.
If the component you require isn’t shown here, please
contact
support@shockwaveseats.com for a complete
illustrated parts breakdown.
ITEM QTY PART NO. DESCRIPTION
1 1 SW-02837 AIR VALVE ASSEMBLY
2 1 SW-07369 S6 FLOAT SHOCK
3 1 SW-07372 RATCHETING HEIGHT ADJUST NUT
4 1 SW-07377 SPRING PLUNGER
5 4 SW-07378 GUIDE RAIL
ITEM QTY PART NO. DESCRIPTION
6 18 SW-07385 PIVOT LOCK CAP
7 1 SW-07387 UPPER SHOCK PIN
8 1 FA-.5-ECLIP-SS E-CLIP FOR 1/2” SHAFT - SS
9 1 FA-1/2-FW-AN960C816L WASHER, FLAT
10 2 FA-1.375-RR-EXT-SP-SS 11-3/8” SPIRAL EXTERNAL RETAINING RING
REPLACEMENT PARTS EMERGENCY PROCEDURES/TROUBLESHOOTING
CONDITION CAUSE SOLUTION(S)
Suspension module is lower than normal or shock
absorber will not pressurize • Leak in system
• Worn or corroded fill valve
• Defective shock absorber • Check system for leaks by applying soapy
water to system connections and look for
bubbles. If a leak is found, either
• Remove the fill valve core and replace with
a new stainless steel one
• Replace the shock absorber - this is
required only on extremely rare occasions
Suspension module is bottoming out • Shock pressure is too low • Attach pump and add air as per this manual
Suspension module is topping. Ride is rough and
erratic. Noise heard or shock felt when seat comes
to top of travel • Shock pressure is too high • Reduce shock air pressure
Squeaking noise when underway • Loose components
• Shock absorber mounting bolts are dry • Tighten loose components
• Apply grease to shock mounting bolts
Moving components or accessories will
not move • Bearing or sliding mechanism is corroded, dry
or binding
• Disassemble if necessary and lubricate with
marine grade grease
PROPRIETARY AND CONFIDENTIAL
NOTICE: THIS DRAWING MAY REVEAL DESIGNS OR INFORMATION PROPRIETARY TO PROFESSIONAL COMPONENTS LTD. BY ACCEPTANCE OF REPRODUCTIONS, RECIPIENTS AGREE TO PROTECT PROFESSIONAL COMPONENTS LTD. RIGHTS AND
ARE WARNED AGAINST USE OF THE DOCUMENT FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED.
5
6
8
9
7
4
10
3
2
1