ShockWatch Trekview, Руководство пользователя

Страница: 10 / 64

10
Turning a Tag On
In order to use the ON/OFF button on the front of the tag, the tag must be placed in standby mode and confi gured using
the TrekView software. To confi gure your tag, please refer to page 57.
Press the ON / OFF button between your forefi nger and thumb. While
pressing the button, view the Active display window. There will be a
momentary solid green light displayed in the status window, indicating
you have successfully turned the TrekView Tag on.
Once a tag is successfully turned on, the programmed soaking time
will begin.
After the soaking period has expired, the tag will begin recording time
and temperature.
NOTE: If the ON button is pressed during the soaking period, the soaking period will start
again. This feature prevents the tag from being turned off immediately after it was turned
on.
Turning a Tag Off
To stop manually, press and hold the ON / OFF button between your
forefi nger and thumb for one full second. While pressing the ON / OFF
button, view the Active LED display window. A green light will fl ash two
times in the Active display window, indicating that the tag has been
successfully turned off.
TREKVIEW TAGS