Shinybow USA SB-6355, Инструкция по эксплуатации

Страница: 9 / 20

7
RECEIVER BACK PANEL
BACK PANEL
1. POWER INPUT (Extra):
DC12V, 1A, (Male Plug). Extra power offer
when Transmitter PoE absent.
2. RS-232 I/O:
Send RS-232 via HDBaseT™ CATx cable.
3. SPDIF INPUT:
Send the SPDIF signal to HDBaseT™ Receiver via
HDBaseT™ CATx cable.
4. SPDIF OUTPUT:
Receive the SPDIF signal from HDBaseT™
Receiver via HDBaseT™ CATx cable.
5. HDBaseT™ INPUT: ( From Transmitter)
HDBaseT™ sends HDMI
Source signal from Transmitter via HDBT RJ-45
connector.
6. HDMI OUTPUT:
HDMI signal Output to destination.
7. AUDIO OUTPUT:
Extra Stereo Audio signal output.
8./9. LAN I/O:
LAN controls I/O.
11. IR INPUT:
Send Bi-directional IR signal to HDBaseT™
Transmitter to Control destination device.
12. IR OUTPUT:
Receive Bi-directional IR signal from HDBaseT™
Receiver to Control source device.