Shinybow USA SB-6355, Инструкция по эксплуатации

Страница: 8 / 20

6
RECEIVER FRONT PANEL
FRONT PANEL
1. POWER LED DISPLAY:
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and
is receiving power. The switcher will remember that last state during a power cycle. When power is removed and resorted, the last
configuration will be evoked.
2. PoE LED DISPLAY:
Power over HDBaseT™ boot on and off status via LED show out.
3. LINK LED DISPLAY:
HDBaseT™ link status via LED illuminates blue to indicate that a HDBaseT™ is present on that input.
4. HDCP LED DISPLAY:
HDCP status via LED show out.
5. FIRMWARE UPDATE:
Firmware Update connection this OD3.5mm jack port.
6. DISTANCE SELECT SWITCH:
Select Extend distance for 100M / 4K2K or 150M / 1080p.
7. USB HOST:
Setup the USB port is HOST.
8. USB DEVICE:
Setup the USB port is DEVICE.
9. SELECT HOST OR DEVICE SWITCH:
Switch Select the USB is HOST or DEVICE.