TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suffi cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT
NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer fi le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 1997. All Rights Reserved.
Version 1.5 MAR 2014
TRADEMARK
ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
CONTENTS
TABLE OF CONTENTS ......................................................1
PACKAGE CONTENTS .................................................... 1
FEATURES & SPECIFICATIONS ..................................... 2
TYPICAL HOOKUP AND OPERATION ............................ 3
RACK MOUNT ................................................................. 4
IR EXTENDER ................................................................. 6
INTRODUCTION
Congratulations on your purchase of one of the most innovative
HDMI 1.4a over single CATx cable Transmitter and Receiver on
the market today. The HDBaseT Transmitter and Receiver can
transmit and receive the HDMI, IR Remote signals input or output
and RS-232 interface signal I/O from a HDBaseT Transmitter or
receiver via LAN (category) cable for long distance Maximum
229 feet (70M). The SB-6333T/R uses the LAN (category cable)
CAT5e, CAT6 or CAT6a via RJ-45 8P8C 568B socket. This
product provide higher full HD HDMI 1.4a, Resolution supports
480i/p, 720p,1080i/p or High HD 4K2K quality that are identical
to the source high quality full HDMI 1.4 signals. This HDBaseT
Transmitter and Receiver are useful for sending the HDMI digital
Video / multi-channel audio format, IR remote input/output and
RS-232 Controls signals via category LAN cable.
PACKAGE CONTENTS
Check that you have the following components;
• SB-6333 Transmitter and Receiver
• Users Guide
• AC Adaptor: 12VDC/1A
(universal power switch 50/60Hz,100~240VAC)
Optional Accessories :
• SB-100 set (IR Receiver, Extender assy plug)
• SB-100C cable (IR Receiver)
• SB-101 set (IR Transmitter, Extender assy plug)
• SB-101C cable (IR Transmitter)
• 1 inch High Wall mount pack (Part # WM-1INCH-80MM)
• CAT6 Category cable distance 229 ft. (70M), (P/N: UTP6-70)
1
