9. HDBaseT
™
RS-232 - 1,2,3,4,5,6,7 & 8 CONNECTION:
(8) RS-232
control ports allow for interfacing to a PC. Controls I/O via the
HDBaseT
™
Transmitters up to (8) rooms each via the Terminal
Block-3pin female socket for serial RS-232 control.
10. HDBASET
™
LAN CONNECTION:
All Tx LAN:
Provides Ethernet
(LAN) connection from the switcher to All HDBaseT
™
Transmitters
(ie. SB-6320T).
11. HDBASET
™
IR INPUT - 1,2,3,4,5,6,7 & 8 REMOTE IR SIGNAL
TO ROOM:
Sends (8) IR signals to (8) rooms via the switchers
HDBaseT
™
Transmitters. When you plug the switchers HDBaseT
™
IR Transmitters into the external port, the rooms IR HDBaseT
™
receivers remain active.
****Certain matrix chassis have an “ALL IN” jack. The “ALL IN”
jack has been removed and replaced with a blank filler cover.
12. IR OUTPUT - 1,2,3,4,5,6,7 & 8 IR SIGNAL TO SOURCE DEVICE:
Sends (8) IR signals to each source device. The IR source channel
is specific to each source device.
For example;
IR #1 should connect to HDMI Source #1 and so on.
****Certain matrix chassis are labeled “IR From ROOM” and have
an additional connection labeled “ALL OUT”. Regardless, the
function of these jacks only supports IR follow Source Control.
The “ALL OUT” jack has been removed and replaced with a blank
filler cover.
REMOTE PORT :
Terminal Block-3pin female socket
ALL HDBASET
™
TX LAN PORT CONNECTOR:
HDBaseT
™
Phone-Jack 8P8C, RJ-45 female socket.
LAN Controls:
Note: From switcher to HDBaseT
™
Transmitter.
IR EXTENDER JACK:
Female Jack - inner OD Ø 3.5 mm
IR EXTENDER JACK:
Female Jack - inner OD Ø 3.5 mm
10
BACK PANEL-HDBASET
™
CONTROLS
BACK PANEL-HDBASET
™
CONTROLS
