manualshive.com logo in svg

Shinybow USA SB-5658K, Инструкция по эксплуатации, Страница: 9 / 16

Поделиться
Скачать
Shinybow USA SB-5658K Скачать руководство пользователя страница 9

7

EDID FUNCTION

EMBEDDED EDID & SCALER MODES FOR HDMI DISTRIBUTION AMPLIFIER

EDID / SCALER SETUP

To Change The EDID & Scaler Modes

The display will show the currently selected EDID mode

Step 1.

 Press 

SELECT

 button

The  button  will  flash  blue  and  the  display  will  show  the  current 

Embedded  EDID  & 

Scaler 

Status.

Step 2.

 Press the

 

ENTER

 button

To set 

EDID & Scaler

 mode: The switcher will return to operation mode.

Operation will abort if no keys are pressed within 5 seconds.

EMBEDDED EDID & SCALER MODES

To Select Embedded EDID Mode Or Scaler Mode

Embedded EDID setup

Press 

SELECT  >  ENTER 

 

button

Select Embedded EDID:

Mode 1 : 1080p-2ch

Mode 2 : 1080p-Bitstream

Mode 3 : 4K2K-Bitstream

Select Scaler Modes:

Mode 1 : 1080p-24Hz

Mode 2 : 4K2K-24Hz

The button will flash blue and the display will show the current 

Embedded EDID & 

Scaler

 Status.

Press 

SELECT

 button: The LED will show the current 

EDID & Scaler

 status.

Repeatedly pressing the 

SELECT

 button will cycle modes thru the options.

RESET

(EDID Return To Factory Default)

How to RESET EDID mode

Press 

ENTER

 

button 

Operation will abort if keep pressed the 

ENTER

 button after 5 seconds.

RESET to the FACTORY DEFAULT.

Mode-1: The EDID will return to 1080p-2CH.

Содержание SB-5658K

















Отзывы:

Нет отзывов