Shinybow USA SB-5658K, Инструкция по эксплуатации, Страница: 13 / 16

11
RS-232 SERIAL INTERFACE CONNECT
RS-232 CONFIGURATION
RS-232 cable is a straight thru cable and not null-modem
Definition Pin Pin Definition
1 1 DCD
TX 2 2 RX
RX 3 3 TX
4 4 DTR
GND 5 5 GND
6 6 DSR
7 7 RTS
8 8 CTS
9 9 RI
RS-232
Leave a space between Command and Data. Terminate each command with a semi-colon “ ; ” All codes are simple text (ASCLL)
If the command sent is correctly, the system will return “SB5658K 00;”
If the command sent is incorrect or out of range, the system will return “SB5658K 01;”
Example of the commanded string to select Inputs:
COMMANDS:
ITEM COMMAND DESCRIPTION
1 POWER Set/Check the status of Power
2 EDID SET/CHECK EDID
1. POWER
FUNCTION COMMAND RESPONSE DESCRIPTION
Power OFF Power 00; SB5658K 00; Power OFF
Power ON Power 01; SB5658K 00; Power ON
Check the Status of Condition Power ?;
Power 00; Power OFF
Power 01; Power ON
2. EDID
FUNCTION COMMAND RESPONSE DESCRIPTION
Select EDID EDID [ii]; SB5658K 00; “ii” is EDID Mode.
01-1080p 2CH
02-1080p Bitstream
03-4K2K Bitstream
04-Down-Scaling to 1080p
05-Up-Scaling to 4K2K
Check the Status of Condition EDID ?;
EDID 01; Set EDID to 1080p 2CH
The Shinybow switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control
system.
RS-232 SERIAL INTERFACE PROTOCOL AND COMMAND
SB Device
PC
BAUD RATE:
9600, 8, n, 1
FORMAT:
[ Command ] [ ] [ Data ] [ ; ]
1. Command
2. Space
3. Data
4. ;