6
FRONT PANEL
FRONT PANEL
10. FUNCTION KEY - AUX (The audio additionalon the “ Audio / ARC” port ):
The AUX FUNCTION feature allows you to replace the embedded HDMI audio signal with
an audio signal that is connected to the switchers Audio AUX Input. Using the AUX function
replaces the audio and does not mix the audio. ( Default = AUX Disabled )
To enable the AUX option on a specific Output, perform the follow steps:
- Press the
AuX
button
- On the
SOuRCE
row, press
1 THRu 4
(the button will illuminate).
- Press
ENTER
. The new configuration will be stored.
The front panel LCD display will show an “X” under the Source port
- Or press
AuX
again to cancel operation
To disable the AUX option on a specific Output, perform the follow steps:
- Press the
AuX
button
- On the
SOuRCE
row, press
1 THRu 4
(the button will illuminate).
- Press
ENTER
. The pre-set configuration will execute.
The front panel LCD display will be blank under the Output port indicating audio source is that which is embedded on the HDMI cable.
- Or press
AuX
again to cancel operation.
Note :
1. Operation will abort if no keys are pressed within 5 seconds.
2. The AUX Audio input only function when a valid HDMI / DVI video signal is present. Without a video, the AUX audio will not operate.