10
BACK PANEL
BACK PANEL
1. DC POWER INLET:
The switcher is fitted with a AC power plug input
connector. Ensure that the plug used is of an approved type and
is of sufficient current carrying connector capacity with the correct
voltage and connector polarity. 100~240Volt AC, 50/60Hz power
supply.
2. IR EXTENDER CONTROL:
Supports one IR extender extends
a maximum distance of up to ~984 ft/300M. When you plug the
external IR extender into the switcher, the front panel IR receiver
remains active.
3. RS-232 CONNECTION:
RS-232 control port allows for interfacing to
a PC, such as a computer or touch panel control, to the switcher via
this DB-9pin female connector for serial RS-232 control.
4. ETHERNET CONNECTION:
ETHERNET control port to allow for TCP/
IP interfacing to a PC, such as a computer or touch panel control
(not a web-browser), to the switcher via the RJ-45 female connector
to control switcher.
POWER SOCKET:
Connector Type: IEC 60320 C13
IR EXTENDER JACK:
Female Jack - inner OD Ø
3.5 mm
This port also support F/W update.
REMOTE PORT :
D-SUB-9pin female connector
REMOTE PORT:
Controls the switcher RJ-45
female connector
ETHERNET PORT:
Note: The Ethernet port and RS-232 port
cannot be used simultaneously. Any
connection to the Ethernet port will disable
serial commands sent to the RS-232 port.