manualshive.com logo in svg

Shinybow USA SB-5645CAK, Инструкция по эксплуатации

Поделиться
Скачать
Shinybow USA SB-5645CAK Скачать руководство пользователя страница 24

EDID MULTIPLE LEARNING MODE-1

SINGLE LEARNING EDID #1

Learning EDID From Destination To Source

Single Learning EDID mode-#1 setup

Press

 

EDID > DESTINATION > SOURCE > ENTER

Press 

EDID > DESTINATION

 Button: The LCM will show LEARNING.

The switcher will LEARN the HDMI EDID destination and pass to the selected source.
Learning EDID setup for HDMI.

Key Press Sequence: 

EDID > DESTINATION # > SOURCE # > ENTER

The EDID for HDMI has been learned.

Single Learning EDID Mode-#1 setup

Press

 

EDID > DESTINATION > DESTINATION > 

SOURCE > ENTER

The switcher will LEARN the HDBaseT

™

 CATx EDID destination and pass to the 

selected source.
Learning EDID setup for HDBaseT

™

 CATx.

Key Press Sequence: 

EDID > DESTINATION # > DESTINATION # > SOURCE # > ENTER

Again, Press the same DESTINATION # to learn HDBaseT

™

 CATx EDID.

The EDID for HDBaseT

™

 CATx has been learned.

NOTE: The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.

For Example:

 When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and 

the EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when 
you want to remove the learning EDID memory from EPROM.

EDID MULTIPLE LEARNING MODE-2 

The MULTIPLE LEARNING MODE-2 feature is part of a firmware update released after JUNE 2014. If you do not see the MULTIPLE 
LEARNING MODE-2 feature then you do not have the latest firmware. You should contact your place of purchase for availability of a firmware 
update. Not all devices are capable of a firmware update. Firmware update requires a PC with OS Windows XP or WIN7 and an RS-232 
port (or USB to RS-232). Customer is responsible for implementing a firmware update and accepts all risks. Others limitations may apply.

LEARNING EDID #2

Passing EDID From Destination To Source

Multiple Learning mode #2 EDID setup

Press

EDID > OFF > DESTINATION #1 THRU #4 > ENTER

The EDID for HDMI has been Learned from the Destination port to the Source port. 

1. Press 

EDID

 button

The LCM will show the current EDID status.

2. Press 

OFF

 button

The LCM will show the current EDID LEARN 
status.

3. Press 

DESTINATION

 button

Press 

DESTINATION #1 THRU #4

 The switcher 

will LEARN the destination HDMI EDID 
and pass to the selected source. Switcher 
will Enable or Disable HDMI EDID for the 
selected source.

4. Press 

ENTER

 button

Press 

ENTER

 to confirm changes. The LCM 

will return to the default screen showing 
selected matrix routing status.

 

NOTE: When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and 

the EDID data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination to 

source or Disable the LEARNING

22

EDID FUNCTION

Содержание SB-5645CAK

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды