5
REMOTE CONTROL
Before making any connections to the switcher. Observe the following:
• Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%)
• Ensure that the power switch is OFF
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances
• Connect all audio video sources and destination equipment power up all source and destination audio-visual sources
• For each destination output select the appropriate input source by using the front panel input 1~16 select buttons. The supplied IR
remote control or through the RS-232 serial communications port.
• Upon power up the switcher will return to its last used setting before powered down.
REMOTE CONTROL
1 &2 . SWITCH POWER ON or OFF:
Controller with a separate power ON and OFF
3. SOURCE : 1 thru 16 INPUT SOURCE SELECTION:
Press input 1~16 sources with selection button
IR REMOTE CUSTOM AND DATA CODES (NEC Standard)
HOW TO SETUP IR CODES :
CUSTOM CODE : 3CC3
POWER ON: 3CC3 A15E
POWER OFF: 3CC3 A25D
PRESS SOURCE - #
SOURCE #1 : 01FE
SOURCE #9 : 07F8
SOURCE #2 : 02FD
SOURCE #10 : 08F7
SOURCE #3 : 03FC
SOURCE #11 : 09F6
SOURCE #4 : 0CF3
SOURCE #12 : 1DE2
SOURCE #5 : 04FB
SOURCE #13 : 1EE1
SOURCE #6 : 05FA
SOURCE #14 : 00FF
SOURCE #7 : 06F9
SOURCE #15 : 1BE4
SOURCE #8 : 0DF2
SOURCE #16 : 18E7
For example; Select source to show Source #1~16 on display,
The IR Data Code list :
SOURCE #1 : 3CC3 01FE
SOURCE #9 : 3CC3 07F8
SOURCE #2 : 3CC3 02FD
SOURCE #10 : 3CC3 08F7
SOURCE #3 : 3CC3 03FC
SOURCE #11 : 3CC3 09F6
SOURCE #4 : 3CC3 0CF3
SOURCE #12 : 3CC3 1DE2
SOURCE #5 : 3CC3 04FB
SOURCE #13 : 3CC3 1EE1
SOURCE #6 : 3CC3 05FA
SOURCE #14 : 3CC3 00FF
SOURCE #7 : 3CC3 06F9
SOURCE #15 : 3CC3 1BE4
SOURCE #8 : 3CC3 0DF2
SOURCE #16 : 3CC3 18E7