REAR PANEL
REAR PANEL
1. DC POWER INLET:
The Switcher is fi tted with a DC power plug input connector.
Ensure that the used is of an approved type and is of suffi cient
current carrying connector capacity with the correct voltage and
connector polarity. 12Volt DC power supply 3A Max (Center pin
positive).
2. IR EXTENDER CONTROL:
Support one of IR Extender
Extend distance maximum 300 Meters / ~1000 feet
When you plug the External IR extender into the switcher, the
front panel IR receiver remain active.
3. RS-232 CONNECTION:
RS-232 control port to allow for interfacing to a PC such as a
computer or touch panel control, to the switcher via this DB-9pin
Female connector for serial RS-232 control.
4. INPUTS- 1, 2, 3, 4, 5, 6, 7, ~ 16 HDMI:
Connect a signal link of HDMI direct digital video/audio to HDMI
Female connector this Female HDMI connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fi x screw Input 1 ~
Input 16
5. OUTPUTS- 1, 2 HDMI
Connect a signal link of HDMI direct digital video/audio to this
Female HDMI connector. This connector supports HDMI digital
video/audio and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fi x screw Output 1 &
Output 2
4
Power Jack:
DC Jack - Inner OD Ø 2.1 mm (+)
Outside OD Ø 5.5mm (GND)
Power input -12VDC, 3A
IR Extender Jack:
Female Jack - inner OD O 3.5 mm
Remote port :
DB-9pin Female connector
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the switcher
can be used with DVI digital video signals
HDCP compliant. DVI does not support audio.
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the switcher can be
used with DVI digital video signals HDCP compliant.