SHINOLA 3540.D, Руководство пользователя

Страница: 7 / 90

12 13
*
ACCUMULATED TIMING
Example
1 Start: start timing
2
Stop: e.g., 15 min. 5 sec. following 1 .
3
Restart: timing is resumed
4 *Stop: e.g., 13 min. 5 sec. following 3 .
The accumulated time = 28 min. 10 sec.
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
* Following
4
, the accumulation of the timing can be
continued by pressing push-button A (Restart/Stop, Restart/Stop,…)
INTERMEDIATE OR INTERVAL TIMING
Example
1 Start: start timing.
2 Display interval:
e.g., 10 min. 10 sec. following 1 .
Timing continues in the background.
3 Making up the measured time:
the three chronograph hands are quickly
advanced to the ongoing measured time.
4 Stop: e.g., 28 min. 10 sec. following 1 .
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
* Following 3 , further intervals or intermediates can be
displayed by pressing B (display interval / make up measured time, …)
1
5
2 3
4
A
B
2
3 5
B
1
4
A
SETTING THE TIME
1 Pull out the crown to position
III
.
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back to position I .
SETTING THE DATE
1 Pull out the crown to position II .
(The watch continues to run.)
2 Turn the crown until the correct date appears.
3 Push the crown back to position I .
CHRONOGRAPH MODEL 5050.B
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
I
(= normal position).
- the four chronograph hands are
precisely at zero position following
activation of push-button
B
. If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero.)
A
B
I
Second hand Big date
Center stop-second
Minute hand
Hour hand
Minute counter
Hour counter
1/10 Second counter
II III I
3
1
2
II
1
2
3