1
Installation Instruction Manual
Indoor Humidity Sensor
DSW-100-H
No.DSW12JE5 2019.10
Preface
Thank you for purchasing our DSW-100-H, Indoor Humidity Sensor.
This manual contains instructions for installation and handling of the DSW-100-H. To ensure safe and correct
use, thoroughly read and understand this manual before using this sensor. To prevent accidents arising from
the misuse of this sensor, please ensure the operator receives this manual.
Notes
• This sensor should be used in accordance with the specifications described in the manual. If it is not used
according to the specifications, it may malfunction or cause a fire.
• Be sure to follow all of the warnings, cautions and notices. If they are not observed, serious injury or
malfunction may occur.
• The contents of this instruction manual are subject to change without notice.
• Care has been taken to ensure that the contents of this instruction manual are correct, but if there are any
doubts, mistakes or questions, please inform our sales department.
• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.
• Shinko Technos Co., Ltd. is not liable for any damage or secondary damage(s) incurred as a result of using
this product, including any indirect damage.
Safety Precautions
(Be sure to read these precautions before using our products.)
The safety precautions are classified into 2 categories: “Warning” and “Caution”.
Depending on the circumstances, procedures indicated by Caution result in serious consequences, so be
sure to follow the directions for usage.
Warning
Procedures which may lead to dangerous conditions and cause death or serious injury, if not carried
out properly.
Caution
Procedures which may lead to dangerous conditions and cause superficial to medium injury or physical
damage or may degrade or damage the product, if not carried out properly.
Warning
• To prevent an electrical shock or fire, only Shinko or other qualified service personnel may handle the
inner assembly.
• To prevent an electrical shock, fire or damage to the instrument, parts replacement may only be
undertaken by Shinko or other qualified service personnel.
SAFETY PRECAUTIONS
• To ensure safe and correct use, thoroughly read and understand this manual before using this
instrument.
• This instrument is intended to be used for general equipment. Verify correct usage after purpose-of-use
consultation with our agency or main office.
(Never use this instrument for medical purposes with which human lives are involved.)
• External protection devices must be installed, as malfunction of this product could result in serious
damage to the system or injury to personnel. Proper periodic maintenance is also required.
• This instrument must be used under the conditions and environment described in this manual.
Shinko Technos Co., Ltd. does not accept liability for any injury, loss of life or damage occurring due to
the instrument being used under conditions not otherwise stated in this manual.
Caution with Respect to Export Trade Control
Ordinance
To avoid this instrument from being used as a component in, or as being utilized in the manufacture of
weapons of mass destruction (i.e. military applications, military equipment, etc.), please investigate the
end users and the final use of this instrument.
In the case of resale, ensure that this instrument is not illegally exported.
和文は裏面をご覧ください。
