
Shining Technology CitiDISK DV Quick Usage Guide v7.1 Shining Technology CitiDISK DV Quick Usage Guide v7.1
Quick Play Last Captured Clip
Play All Captured Clips
Choosing Favorable DV Video File Format
Note:
This paragraph for choosing the video file format is for the
FW1256B (no middle “
orange
” light), FW1256C and
FW1256H when DV recording is selected, not suitable for
earlier released DV FW1256A models.
Operate the following steps only when the external power adapter is
plugged into the unit, and DO NOT turn off the unit before the
sequence is completed.
•
Look at the front panel of the CitiDISK DV.
•
Turn on the power of the CitiDISK DV. Wait until both lights start
to blink.
Press and hold
RED
button for over 5 seconds. Current stored file
format follows patterns illustrated below. “Raw DV” is set as the
default for the first time use.
Raw DV
(Clipxxyy.dv)
Windows AVI2
(Clipxxyy.avi)
QuickTime MOV
(Clipxxyy.mov)
User Defined **
** Refer to the user manual’s “How to customize User Defined file
format” section; the manufacturer sets it to “Canopus AVI2”.
•
Choose next file format by toggling the
RED
button.
•
Once the file format is determined, stop toggling and wait for
10 seconds. Both buttons will go off and stay off for 3 seconds.
•
The CitiDISK DV will start writing the new file format
information into internal memory. Both lights will blink rapidly
for approximate 10 seconds during the writing process.
•
Once the file format is completed, both lights will blink
normally to indicate the writing process is successful. User
MUST turn off the power before programming a new format
again.
•
The CitiDISK DV is now ready to capture video using the
programmed file format.
•
Connect the FireWire cable (4-pin end) to the camcorder’s DV
port.
•
Connect the FireWire cable (6-pin end) to the CitiDISK DV.
•
Set the camera to “VCR” mode.
•
Toggle the middle “QPlay” button to play the last captured clip
and this light will turn solid
ORANGE
when playing. Once the
last captured clip ends, the light will automatically turn off.
P8
P9