Shining Technology CitiDISK DV Quick Usage Guide v7.1 Shining Technology CitiDISK DV Quick Usage Guide v7.1
Buttons, Connectors, Switch & Status Lights
Note:
The following illustration describes each of the buttons of
both the CitiDISK DV (FW1256C) and the CitiDISK DV (FW1256H);
and these three buttons serve as status indication lights as well.
Technical Specifications
Interface
One IEEE1394A port
SBP-2, Isochronous video
streams
Cable
One 6pin-4pin IEEE1394A
standard included
Sustained Device Transfer
Rate
up to 12 MBytes/second
Internal Battery
Rechargeable, Lithium based
battery good for 90 minutes
non-stop recording
External Power
+6V to +18V DC in
Operating Temperature
0 to 55 Centigrade
Relative Humidity
95% Maximum
Storage Temperature
-22 to 65 Centigrade
Dimension
Width -- 77mm
Length -- 135mm
Height -- 24mm
Weight
Less than one pound
DV Recording Capacity
FW1256C-40 180 minutes
FW1256c-60 270 minutes
FW1256C-80 360 minutes
FW1256C-100 420 minutes
Limited Warranty
The manufacturer guarantees that every CitiDISK DV including the kit but
not the batteries embedded inside the enclosure (hard disk drive warranty
policy is exclusive and is warranted by its manufacturers) will be free from
physical defects in material and workmanship under normal use for one (1)
year from the date of purchase. If the product proves defective during this
warranty period, contact your manufacturer's customer support in order to
obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF
PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE
PROCESSED WITHOUT PROOF OF PURCHASE.
Do not drop, jar, bump, shock the unit, or expose to sources of
excessive vibration. Keep in mind that CitiDISK DV uses a 2.5”
hard drive, which is similar to those used in laptops. Gently
handle and carry your CitiDISK DV, especially during video
recording. If the battery is not fully charged, user must charge it
for at least 4 hours before any self-powered usage.
Battery and Main
switch
:
On: Switched toward the
white “Dot”
Off: Switched away from
the white “Dot”
RECORD Button & Status Light:
Solid
RED
: Recording
Blinking
RED
: 5 minutes left in
recording capacity or not connected
Internal Battery Charging Light:
Bright
BLUE
: Charging
Dim
BLUE
: Charging almost complete
Off: Charging complete or in access
Quick Erase Button
:
Quickly erasing all of clips
in “Media” folder
POWER Button and
Status Light:
Solid
GREEN
: unit is on
Blinking
GREEN
: 5
minutes left in the
internal battery
External Power
In Connector:
A6V to
+18V DC power
input.
Automatically
switches off and
charges internal
battery when
plugged in
QPlay Button and Status Light:
Solid
ORANGE
: Playing last captured
clip
PlayAll Button and Status Light:
Blinking
ORANGE
: Playing all
captured clips from last scene
forward or backward
FireWire
Connector:
Connects to
camera or
computer
P2
P15