Shining Stars ZX-V8T, Руководство пользователя

Страница: 52 / 60

- 51 -
1. In order to maintain and prolong the working life of your treadmill, we suggest you
power off for 10 minutes after every 2 hours’ running.
2. The loose running belt will lead slip when you are running; the tighten running belt
will affect the performance of the motor, also can increase the wearing of the rollers
and running belt. The perfect state is that the belt can be lift from the running deck
about 50-75mm
BELT MIDDLE PLACEMENT AND TIGHTNESS ADJUSTMENT
It is very necessary to adjust the belt to the best condition for the better use of the
treadmill and the treadmill can work better
PUT THE TREADMILL RUNNING BELT AT THE CENTER:

Put the motorized treadmill on the level ground.let the treadmill run at the speed of
6-8 miles per hour,observe the running belt deviating condition.

if the running belt deviate to the right,pull off the safety key and unplug the
power,turn the right side adjusting bolt clockwise by 1/4 circle,plug the
power ,safety key,make the treadmill run,watch the running belt deviating
condition.Repeat the above steps,until the running belt is in the middle.Picture
A

If the running belt deviate to the left,pull off the safety key,unplug the power,turn
the left adjusting bolt clockwise by 1/4 circle,plug the power,safety key,make the
treadmill run,watch the deviating condition of the running belt.Repeat the above
steps,until the running belt goes to the middle.Picture B.

After the above adjustment or a period of time’s use,running belt would become
loosen,need adjustment.Pull off the safety key,power switch,and turn the left
and right adjusting bolt clockwise by 1/4 circle,plug power,safety key,make the
treadmill run,then stand on the treadmill to confirm the tightness.Repeat above
steps,until the running belt is moderate in tightness.picture C.
PICTURE A PICTURE B PICTURE C