Shining 3D Transcan-C_User Manual_V1.4.2
40
7.2.3.
Simplification
After simplification, the polygon numbers, file size and level of detail of data will be reduced
accordingly. Set the ratio from 1 to 100, the default is 0.
The comparison of detail between before simplification and after simplification (at 70%
simplify proportion).
Simplification menu
Click “
Apply
” button to simplify data, preview the result of current setting.
Click “
Confirm
” button to apply the “Simplification” setting.
Click “
Cancel
” button to quit, and go back to the original data.
Multiple operations on “Simplification”, the result will not be added. It will always operate
on the original data.
simplification 0
simplification 90
7.2.4.
Mesh Optimization
Mesh optimization can optimize the quality of the data. There are 3 ratio options of mesh
optimization. Processing time will be different. Below shows the result of 3 different ratios.
Original