Einstart
®
-C User Manual
13
Full Support
：
Both outer and
inner support when generating path. “Inner Support” means support is
created on the model surface.
Add Raft: When generating path, the software will generate a raft for your model, which can secure the
model effectively and compensate height variance.
Thin-wall: When generating path, the software will create a shell structure rather than infill. It will also close
the bottom of the model but not the top.
Peel off Factor: Users can adjust the distance between model and raft by changing this factor. It is a ratio
related to layer thickness. For example, if layer thickness is 0.2 mm and peel off factor is 2, the distance
between the model and raft is 0.4 mm.
Extruder Temperature: Temperature the nozzle will reach when printing. We suggest you set this value
based on the requirement of the material used.
Print once generated: Once the path is generated and the machine is ready, the printer will automatically
begin printing.
5.4 Introduction of LED Screen Button and Its Logic
No. Interface
Pic.
Function
Button function
Logic
1
Choose
Language
language selection is
required during initial set up.
Language
Choosing
Skip to 2
2
WIFI
Connectio
n
Connect to WIFI or not.
Skip to 3
Skip to 11
