Einstart
®
-C User Manual
12
5.3
Advanced Parameters
5.3.1 Path Generator
The use of
“basic setting” is normally sufficient. We suggest you generate path with our default parameters
since improper changes could lead to print failure or extruder blockage.
5.3.1.1 Print Mode
Simple: 0.4mm layer thickness
；
Fast: 0.3mm layer thickness
；
Standard: 0.3mm layer thickness
；
Quality: 0.15mm layer thickness
；
Extreme: 0.1mm layer thickness
；
5.3.1.2
Support
Null Support: No support when generating path.
Outer
Support: “Outer Support” creates support where the support structure is printed directly on the raft
or platform (when printing without raft).
