Shining 3D EinScan-SP, Руководство пользователя

Страница: 15 / 46

14
Mode selection
(1) Fixed Scan ( With Turntable ): This mode is recommended for objects within the size of
200*200*200mm.
(2) Fixed Scan ( Without Turntable ): This mode is recommended for objects over the size of
200*200*200mm, as well as a comparative stable environment (without obvious vibration) are
required.
Do not touch or move the object being scanned while the scan is in progress. Do not scan
moving object, size smaller than 30*30*30mm,and objects with hollow pattern design .
Mark points stick
Stick mark points on the object in random, avoiding sticking in one line.Public areas
alignment require at least four mark points. While placing the points, uniformly stick the mark
points on the object, and make sure that in each single scan area has at least 4 points.
Special objects
Before scan objects in transparent, semi-transparent or black shall spray on the surface.
Scan Preparation