SHINING 3D - EinScan-Pro series - User Manual - June 2019
48
5.3.2.
Edit scan(s)/group(s)
Double click
on a group or a scan, to enter the edition mode. The edition are applied
to the selected data only. Modifications will not affect the rest of the data.
Shift + left mouse
: select data on the 3d view, and enter the edition mode. the
edition is applied on the visible data only.
See [5.2.2.Edit Scan] for the edition functions.
5.4.
Alignment
If you use markers, the data will automatically align with the marker positions. If not,
an automatic alignment will be calculated with a best-fit of the single scan to the
previous scans according to the geometric features. If the object is not with enough
geometric features, you can use manual alignment.
Click the button to open the Manual Alignment interface
Drag and drop single scan or group to the float and fixed window
Single scan or group can be dropped into both windows. Scans in the group are not
allowed. Split the group first if it is needed.
click the button to remove the scan/group from fixed or float window
Texture visible ON/OFF (color pack only)
SHIFT + click left mouse button
to select at least 3 non-collinear corresponding
points in the 3D preview windows for Manual Alignment, as shown below.
Ctrl+Z:
cancel last point picked
Содержание EinScan Pro
Страница 17: ...SHINING 3D EinScan Pro series User Manual June 2019 17 EXScan Pro on the start menu ...
Страница 30: ...SHINING 3D EinScan Pro series User Manual June 2019 30 Add on is required for this function ...
Страница 41: ...SHINING 3D EinScan Pro series User Manual June 2019 41 4 4 Scan Workflow ...
Страница 52: ...SHINING 3D EinScan Pro series User Manual June 2019 52 Browse to load a GMF ...