SHINING 3D - EinScan-Pro series - User Manual - June 2019
36
HD calibration result
Go back to the scan mode selection page by clicking “Next” at the bottom left.
3.2.3.
Accuracy test
While scanning, if markers cannot be recognized, tracking is easily lost or
misalignment happens often, Accuracy Diagnostic is suggested.
Same as camera calibration step1, scan on the front side of the calibration board
(black) to do an accuracy test.
Click Start in the software or press Play button on the
scanner to capture automatically
or press
During the capture process, LED rings blink and a cross is projected. Move the
scanner from top to bottom or from bottom to top slowly and steadily, until the
rangefinder is completely filled with green bars.
Follow the instructions on the video and on the screen to capture the different
pictures.
Содержание EinScan Pro
Страница 17: ...SHINING 3D EinScan Pro series User Manual June 2019 17 EXScan Pro on the start menu ...
Страница 30: ...SHINING 3D EinScan Pro series User Manual June 2019 30 Add on is required for this function ...
Страница 41: ...SHINING 3D EinScan Pro series User Manual June 2019 41 4 4 Scan Workflow ...
Страница 52: ...SHINING 3D EinScan Pro series User Manual June 2019 52 Browse to load a GMF ...