- English -
3
English
8. RECOMMENDED SHADE SETTINGS
9. TROUBLESHOOTING
PROBLEM
RESOLUTION
The ADF does not darken when welding.
•
Stop welding or cutting immediately.
•
Make sure the sensors are facing the arc and no obstructions.
•
Check the mode that is on WELD not GRIND.
•
Review sensitivity recommendations and adjust sensitivity if possible.
•
Replace the battery if necessary.
The ADF stays dark after welding or
there is no arc present.
•
Adjust the sensitivity to the lower level (LO).
•
If the welding place is extremely bright, it is recommended to reduce the
surrounding light level.
The ADF switching during the welding.
•
Increase the sensitivity if possible.
•
Make sure the sensors are facing the arc and no obstructions.
•
Increase Delay 0.1 − 0.3 second may also reduce switching.
Inconsistent shade number on
the corner of ADF.
•
It is a natural feature and will not be dangerous for the eyes.
•
In order to get a maximum comfort, try to keep an view angle at around 90°.
Содержание 5000X-HD
Страница 1: ...5000X HD WELDING HELMET...
