- English -
1
English
5000X-HD
Auto-darkening Welding Helmet
WARNING
Read and Understand All Instructions Before
Using the Equipment.
SAFETY WARNINGS
The
auto-darkening helmet with improved High Definition Filter
Optics
delivers a new generation of face and eye protection.
Advanced integrated technology, such as LCD, optoelectronics
detection, solar power, and microelectronics are coordinated
to produce one of the safest, fastest and most reliable auto-
darkening helmets available.
The auto-darkening helmet not only efficiently protects
operator’s eyes
and face from sparks, spatter, and harmful
radiation under normal welding conditions,
but also makes both
hands free to strike arc accurately resulting in increased
efficiency and improved quality welds. It may be widely used for
various welding, cutting, spraying and arc gouging, etc.
•
This auto-darkening helmet is not suitable for "overhead"
welding, laser welding/cutting, or oxyacetylene welding/
cutting applications.
•
This helmet will not protect against explosive devices or
corrosive liquids. Machine guards or eye splash protection
must be used when these hazards are present.
•
Impact resistant, primary eye protection, spectacles or
goggles that meet current CE specifications must be worn
at all times when using this welding helmet.
•
Avoid work positions that could expose unprotected areas
of the body to spark, spatter, direct and/or reflected
radiation. Use adequate protection if exposure cannot be
avoided.
•
Do not make any modifications to either the ADF cartridge
or helmet, other than those specified in this manual.
•
Do not use any replacement parts other than those
specified in this manual. Unauthorized modifications and
replacement parts will void the warranty and expose the
user to the risk of personal injury.
•
Do not immerse this helmet in water because this model is
not waterproof.
•
Do not use any solvents on any ADF or helmet
components.
•
The recommended operating temperature range for this
ADF cartridge is -10°C~65°C (14°F~149°F). Do not use this
device beyond these temperature limits.
•
Failure to follow these warnings and/or failure to follow all of
the operating instructions could result in severe personal
injury.
CONTENTS
1.
Before using
2.
Warranty
3.
Technical data
4.
Modes, controls & selection
5.
Headgear
6.
Power supply
7.
Maintenance
8.
Recommended shade settings
9.
Troubleshooting
10.
Parts breakdown
1. BEFORE USING
BEFORE USING
•
Check for light tightness and check the inside & outside
protection lens are clean and that no dirt is covering the
sensors on the front of the
auto-darkening-filter (ADF)
cartridge.
•
Make sure the protection films on both inside & outside
protection lens are removed.
•
Inspect all operating parts for signs of wear or damage. Any
scratched, cracked, or pitted parts should be replaced
immediately.
2. WARRANTY
The auto-darkening helmets are warranted for 2 years from the
date of purchase. The duration of use depends on various factors
such as use, cleaning storage and maintenance. Frequently
inspections and replacement if it is damaged are recommended.
If any of the manual conditions is not kept or followed, the
warranty is automatically invalid.
Содержание 5000X-HD
Страница 1: ...5000X HD WELDING HELMET...
