background image

29

PURCHASED REPAIR PARTS AND ACCESSORIES

•  90-day all applications

ATTENTION ENGINE POWERED PRODUCT OWNERS

This Shindaiwa engine powered product is a quality-engineered unit which has been manufactured to exact tolerances to provide 

superior performance.  To help ensure the performance of the unit, it is required to use engine oil which meets the ISO-L-EGD 

Standard per ISO/CD 13738 and JASO M345/FD Standards.  Shindaiwa Red Armor

TM

 and Shindaiwa One

TM

 are a premium engine 

oil specifically formulated to meet ISO-L-EGD (ISO/CD 13738) and JASO M345/FD Standards.  The use of engine oils designed 

for other applications, such as for outboard motors or lawnmowers can result in severe engine damage, and will void your engine 

limited warranty. 

THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY:

•   Lack of lubrication or engine failure, due to the use of engine oils that do not meet the ISO-L-EGD (ISO/CD 13738) and JASO    

    M345/FD Standards. Shindaiwa Red Armor

TM

 and Shindaiwa One

TM

 Engine Oil meets the ISO-L-EGD and JASO M345/FD        

    Standard. Emission related parts are covered for 5 years residential or 2 years commercial use regardless of two-stroke oil used,  

    per the statement listed in the EPA or California Emission Control Warranty Explanation. 

•   Damage caused by use of gasohol, containing methanol (wood alcohol), or gasoline containing less than 89 octane.  Only use 

gasoline which contains 89 octane or higher. Gasohol which contains a maximum 10% ethanol (grain alcohol) or 15% MTBE 

(methyl/tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the Shindaiwa oil label and 

covered in your operator’s manual.

•   Engine damage caused by use of ether or any starting fluids.  

•   Damage caused by tampering with engine speed governor or emission components, or running engines above specified and 

recommended engine speeds as listed in your operator’s manual.

•   Operation of the unit with improperly maintained/removed cutting shield or removed/damaged air filter.  

•   Damage caused by dirt, pressure or steam cleaning the unit, salt water, corrosion, rust, varnish, abrasives, and moisture.

•   Defects, malfunctions or failures resulting from abuse, misuse, neglect, modifications, alterations, normal wear, improper servic

-

ing, or use of unauthorized attachments. 

•   Incorrect storage procedures, stale fuel, including failure to provide or perform required maintenance services as prescribed in 

the operator’s manual.  Preventative maintenance as outlined in the operator’s manual is the customer’s responsibility.

•   Failures due to improper set-up, pre-delivery service or repair service by anyone other than authorized Shindaiwa servicing 

dealer during the warranty period.

•   Certain parts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups. 

•   Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Opera-

tor’s Manuals.

•   Overheating or carbon scoring failures due to restricted, clogged exhaust port or combustion chamber, including damage to 

spark arrester screen.

•   Adjustments after the first (30) thirty days and beyond, such as carburetor adjustment and throttle cable adjustment.

•   Damage to gears or gear cases caused by contaminated grease or oil, use of incorrect type or viscosity of lubricants, and/or 

failure to comply with recommended grease or oil change intervals.

•   Damage caused by pump or sprayer running dry, pumping or spraying caustic or flammable materials, or lack of or broken 

strainers. 

•   Additional damage to parts or components due to continued use after operational problem or failure occurs. Should operational 

problem or failure occur, the product should not be used, but delivered as is to an authorized Shindaiwa servicing dealer.

It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your Shindaiwa 

product or by visiting WWW.SHINDAIWA.COM. Your receipt of purchase including date, model and serial number must be main-

tained and presented to an authorized Shindaiwa servicing dealer for warranty service. Proof of purchase rests solely with the cus-

tomer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. 

Some states do not allow the exclusion or limitation of incidental or consequential damages, so you may also have other specific 

legal rights which vary from state to state. This limited warranty is given by ECHO Incorporated, 400 Oakwood Rd., Lake Zurich, IL 

60047.

DISCLAIMER OF IMPLIED WARRANTIES

This limited warranty is in lieu of all other expressed or implied warranties, including any warranty of FITNESS FOR A PARTICU-

LAR PURPOSE OR USE and any implied warranty of 

MERCHANTABILITY

 otherwise applicable to this product. ECHO, INC. and 

its affiliated companies shall not be liable for any special incidental or consequential damage, including lost profits.  There are no 

warranties extended other than as provided herein. This limited warranty may be modified only by ECHO, INC.

X7561120400

01/13

Содержание T2822X

































Отзывы: