Shindaiwa PowerBroom PS344 Скачать руководство пользователя страница 4

Страница: 4 / 28

The Properly Equipped Operator

Always operate with both hands

firmly gripping the unit.

Always protect yourself from hazards

such as thorny brush and flying debris

by wearing gloves and close fitting

clothing that covers arms and legs.

Never wear shorts. Don’t wear loose

clothing or items such as jewelry that

could get caught in machinery or

underbrush. Secure long hair so it is

above shoulder level.

Always wear eye and hearing protection.

Shindaiwa recommends wearing a face shield as

additional face and eye protection.

Wear sturdy footwear with nonslip

soles to provide good footing. Steel-

toed safety boots are recommended.

Never operate unit bare-footed!

Keep a proper footing and do not

overreach—maintain your balance

at all times during operation.

Keep away from rotating

sweeper belts or bristles at

all times, and NEVER lift a

moving attachment above

waist-height.

Safety

(continued)

IMPORTANT!

Safety and Operation Information Labels: Make sure

all information labels are undamaged and readable.

Immediately replace damaged or missing informa-

tion labels. New labels are available from your local

authorized Shindaiwa dealer.

Safety Labels

READ THE

OPERATOR’S MANUAL.

WEAR HEARING AND ANSI Z87.1

APPROVED EYE PROTECTION.

BEWARE OF THROWN

DIRT AND DEBRIS.

MAINTAIN A

SHALLOW

WORKING

ANGLE…

DO NOT USE ON UNGUARDED

ELEVATED SURFACES.

…AVOID MOVING TOWARD

VERTICAL.

X505003530

Shindaiwa Inc.

This label indicates the minimum distance between

front handle and rear grip per ANSI B175.3.

Содержание PowerBroom PS344





























Результаты поиска

Содержание PowerBroom PS344

Отзывы:

Похожие инструкции для PowerBroom PS344

Бренды по названию

Популярные бренды

Shindaiwa PowerBroom PS344, Руководство владельца/оператора

Результаты поиска

Содержание PowerBroom PS344

Отзывы:

Похожие инструкции для PowerBroom PS344

Бренды по названию

Популярные бренды