Shindaiwa M243S, Руководство оператора

Страница: 22 / 124

20
Maintenance
Maintenance
Daily Maintenance
Prior to each work day, perform the following:
 Remove the dirt and debris from the engine, check the cool-
ing fins and air cleaner for clogging, and clean them as nec-
essary.
 Carefully remove any accumulations of dirt or debris from
the silencer and fuel tank. Check cooling air intake area at
base of crankcase. Remove all debris. Dirt build-up in these
areas can lead to engine overheating, fire, or premature
wear.
 Check for loose or missing screws or components. Make
sure the attachment is securely fastened.

Check the machine for leaking fuel or grease.
10- Hour Maintenance
(more frequently in dusty conditions)
 Remove the air cleaner cover by loosening the unscrew fas-
tener and lifting.
 Remove the air cleaner element.
 Clean or replace as necessary.
 Wash element thoroughly in soap and water.
 Let element dry before reinstalling the element.
 Replace air cleaner cover.
10/15 Hour Maintenance
 Check plug gap. Correct gap is 0.6 mm to 0.7 mm.
 Inspect electrode for wear.
 Inspect insulator for oil or other deposits.
 Replace plug if needed and tighten to 15 N·m - 17 N·m (150
kgf·cm to 170 kgf·cm).
WARNING
 Before performing any maintenance, repair, or cleaning work on your unit, make sure the engine and attachment are
completely stopped. Disconnect the spark plug wire before performing service or maintenance work.
1. Cylinder fins 2. Air intake
1. Unscrew fastener 2. Air filter element
CAUTION
 Never operate the unit if the air cleaner assembly is
damaged or missing.
a: 0.6 - 0.7 mm